Silicon Carbon Alloy Factory Supply High Carbon Silicon
Size: 10–50 mm or 0–10 mm powder
Low Al, low S, stable quality
Ideal for steelmaking deoxidation and carburizing
Properties:
Silicon carbide (SiC) alloy is a compound made from silicon and carbon, combining the benefits of both elements. Silicon carbide alloys are known for their unique combination of physical, mechanical, and chemical properties:
High Thermal Conductivity: Silicon carbide has excellent thermal conductivity, which helps in heat dissipation and temperature regulation in industrial applications.
High Hardness: It is one of the hardest known materials, making it highly resistant to wear, abrasion, and mechanical stress.
Chemical Stability: SiC is highly stable in corrosive environments, resistant to oxidation and most acids, alkalis, and solvents.
High Temperature Resistance: It maintains its strength and structural integrity even at very high temperatures (up to 1,600°C or 2,912°F).
Electrical Conductivity (semiconductor): Depending on the form and treatment, silicon carbide can exhibit semiconducting properties, making it useful in electronic applications.
Low Thermal Expansion: Silicon carbide has a low coefficient of thermal expansion, making it resistant to thermal shock.
Low Density: SiC is relatively light compared to other high-performance ceramics, making it useful in lightweight applications without compromising strength.
Advantages:
High Efficiency: Due to its superior thermal conductivity, SiC can operate at higher temperatures, leading to more efficient energy use in various applications.
Durability: The hardness and wear resistance of silicon carbide make it ideal for long-lasting components in extreme environments.
Corrosion Resistance: SiC is highly resistant to corrosion, oxidation, and chemical reactions, which is critical in harsh industrial conditions.
Superior Strength-to-Weight Ratio: SiC alloys provide a high strength-to-weight ratio, making them ideal for lightweight yet strong components in aerospace, automotive, and defense applications.
Electrical and Thermal Conductivity: SiC has unique semiconductor properties that allow it to be used in high-performance electronics and power devices.
Sustainability: Silicon carbide is made from abundant raw materials, contributing to sustainability in manufacturing processes.
Summary:
Silicon carbide alloys combine exceptional mechanical, thermal, and electrical properties, making them indispensable in a variety of high-performance, high-temperature, and harsh-environment applications. Their advantages, such as high efficiency, durability, and versatility, make them key materials in industries ranging from aerospace and defense to automotive and electronics.


Application
Aerospace and Defense: Due to its high strength, heat resistance, and low density, SiC is used in aerospace components, such as rocket nozzles, turbine blades, and heat shields. It is also used in armor-piercing projectiles and military armor.
Power Electronics: Silicon carbide's electrical properties make it a key material for power electronics, including diodes, transistors, and semiconductor devices used in high-power, high-efficiency applications like electric vehicles (EVs), solar inverters, and power supplies.
Automotive: In the automotive industry, SiC is used in brake discs, clutch components, and engine parts. Its high wear resistance, high-temperature strength, and low thermal expansion make it ideal for performance automotive parts.
Electrical and Thermal Conductors: SiC is used in devices that require high thermal conductivity, such as heat exchangers, heat sinks, and electrical conductors in electronics and industrial equipment.
Cutting Tools: SiC is used in grinding and cutting tools due to its hardness and resistance to wear. It is used for machining hard materials like steel, glass, and ceramics.
Ceramic Materials: Silicon carbide ceramics are used for high-performance ceramic applications, such as ceramic armor, industrial seals, bearings, and furnace linings.
Renewable Energy: In solar power systems and energy storage devices, SiC semiconductors are used for more efficient power conversion, leading to better energy management and reduced losses in energy systems.
High-Temperature Industrial Applications: SiC is used in furnaces, kilns, and other high-temperature industrial equipment, where its ability to withstand extreme conditions is critical.
Marine and Chemical Industries: SiC is often used in pumps, valves, and other components exposed to highly corrosive substances, due to its superior resistance to chemical corrosion.
Specification

FAQ
Q: Q: What is payment term?
A: A: T/T OR L/C
Q: Q: How about delivery time?
A: A: Within 10 days after payment
Case Study
Background
A mid-sized integrated steel mill operating two 120-ton electric arc furnaces (EAFs) and a ladle refining station faced persistent challenges in its secondary metallurgy process. The plant produced high-strength low-alloy (HSLA) steel grades for automotive structural components. Two critical issues plagued production: (1) inconsistent deoxidation efficiency, leading to frequent nozzle clogging during continuous casting, and (2) high variability in carbon recovery rates when using conventional petroleum coke and ferrosilicon separately. These problems resulted in a 4.2% rejection rate due to off-spec oxygen content and carbon segregation, costing the mill approximately $2.8 million annually in scrap, rework, and delayed shipments.
The Solution: High Carbon Silicon Adoption
After evaluating alternative alloying materials, the mill's technical procurement team decided to trial a high carbon silicon (HC-Si) product supplied directly from a silicon carbon alloy factory. The material had a typical composition of Si 55–65%, C 12–18%, Fe balance, with strictly controlled impurities: Al ≤ 1.5%, P ≤ 0.04%, S ≤ 0.05%. The particle size was optimized at 10–40 mm for ladle addition, ensuring rapid dissolution without excessive dust generation or splash.
The key rationale for switching was the synergistic effect of silicon and carbon in a single alloy. Unlike adding ferrosilicon (for deoxidation) and recarburizer (for carbon adjustment) in two separate steps, high carbon silicon allows simultaneous deoxidation and carburization. The silicon provides strong oxygen affinity (forming SiO₂-based slags), while the carbon dissolves efficiently into the molten steel bath. Furthermore, the exothermic nature of silicon oxidation helps maintain bath temperature, reducing the need for additional electrical boosting during refining.
Implementation Process
The trial ran over 8 weeks, covering 420 heats of three HSLA grades. The mill replaced 70% of its prior ferrosilicon + petroleum coke addition with a single high carbon silicon charge, adjusted per heat weight and target chemistry. Addition rates were fine-tuned using an in-house predictive model based on oxygen activity measurements from a lance-mounted sublance sensor. Ladle stirring was maintained at moderate argon flow (0.8–1.2 Nm³/min) to promote homogeneous mixing without excessive slag entrainment.
Results and Observations
The outcomes were quantified across multiple performance indicators:
Deoxidation efficiency improved by 22% on average. Dissolved oxygen content in the ladle before continuous casting dropped from 28–35 ppm to 18–24 ppm, with significantly lower standard deviation. This directly reduced alumina-based inclusions, cutting nozzle clogging events by 63% over the trial period.
Carbon recovery rate increased from 82–86% (with separate additions) to a consistent 91–94% with high carbon silicon. The uniformity of carbon distribution across the cast strand improved markedly, with segregation index falling from 1.18 to 1.07.
Total alloy cost per ton decreased by approximately $6.50, factoring in the lower price per unit of combined Si+C compared to buying two separate materials, plus savings from reduced refractory wear and fewer casting interruptions.
Tap-to-tap time shortened by 4 minutes per heat, as the single addition eliminated one entire alloying step and reduced the number of samplings needed for chemistry correction.
Challenges and Adjustments
Early in the trial, the mill observed slightly higher slag basicity due to increased SiO₂ formation. This was mitigated by adjusting lime addition in the EAF tapping stream. Additionally, the finer fraction (below 5 mm) present in some lots caused minor dusting issues during pneumatic conveying, prompting the supplier to tighten the size specification to <8% passing 5 mm.
Long-Term Outcome
After the 8-week trial, the mill permanently switched to high carbon silicon for all HSLA grades. Over 12 months, the rejection rate dropped from 4.2% to 1.7%, yielding annual savings exceeding $4.1 million. The consistent performance also enabled the mill to confidently reduce trim additions during ladle refining, further streamlining operations. The silicon carbon alloy factory's ability to maintain stable composition and size distribution proved critical-deviations exceeding ±3% Si or ±2% C directly correlated with recovery losses, reinforcing the importance of stringent supplier quality control.
Conclusion
This case demonstrates that high carbon silicon from a dedicated alloy factory offers a technically superior and economically attractive alternative to separate deoxidation and carburization agents. For steelmakers aiming to improve cleanliness, consistency, and cost-efficiency, high carbon silicon warrants serious consideration as a standard ladle metallurgy input.
📧E-mail: goldenltd.silicon@gmail.com 📞WhatsApp: 86 16663721147
Hot Tags: Silicon Carbon Alloy Factory Supply High Carbon Silicon, China Silicon Carbon Alloy Factory Supply High Carbon Silicon manufacturers, suppliers, factory, Calcium Silicon Casi Alloy, Ferro Chrome, Silicon Manganese, Silicon Series, Silicon Slag, Silicon Slag To Replace Fesi And Reduce The Cost
Previous
Casi, Calcium Silicone AlloyYou Might Also Like
Send Inquiry


