Oct 07, 2022 Leave a message

Operation

Diffusion gas detector is that the gas in the detected area slowly flows the sample gas into the instrument with the free flow of air for detection, which needs to be placed on site. This method is affected by the detection environment, such as ambient temperature, wind speed, etc., and is not suitable for air sources with low pressure. The advantage of diffusion gas detectors is that the cost is lower than that of pump suction.


The pump suction gas detector is equipped with a gas sampling pump. Its working mode is that the power supply drives the gas sampling pump to extract and sample the gas in the area to be measured, and then sends the sample gas to the instrument for detection. The pump suction gas detector is characterized by fast detection speed, remote measurement of dangerous areas, and safety of maintenance personnel. It is suitable for occasions where the gas detector cannot be placed on site, and where there are special requirements for response speed, differential pressure, etc.


The gas sampling pump is an important running part of the pumping gas detector, which is directly related to the life and reliability of the instrument. Gas detectors generally use small, miniature volume air pumps. In the design, the micro air pump is selected according to the requirements of flow, pressure, power, isolation from the sample, no leakage, light weight, low noise, electromagnetic compatibility, life and so on.


Kindly pls contact with us if you have any inquiry, the best solutions for gas detectors will be offered accordingly.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry