Ferro Barium Inoculant Low Cost
Products Description
Ferro Silicon Barium (FeSiBa) is a specialized inoculant used in the production of grey and ductile cast iron. Combining the graphitizing effect of silicon with the fade-resistance of barium, it helps refine graphite structure, minimize chill, and maintain stable casting properties over extended pouring times. FeSiBa is particularly valued in foundries seeking consistent mechanical properties and reduced scrap rates, even in challenging production conditions.
Specification
| Element | Typical Content (%) |
|---|---|
| Silicon (Si) | 65 – 75 |
| Barium (Ba) | 2 – 6 |
| Calcium (Ca) | 1 – 2 |
| Aluminum (Al) | ≤ 2 |
| Carbon (C) | ≤ 0.5 |
Particle Size: 0.2–1mm, 1–3mm, 3–8mm, or customized per customer request
Packing: 25kg woven bags or 1MT jumbo bags
Standard: Produced under ISO-certified quality control systems
Can Barium Inoculants Improve Ductile Iron Quality?
Yes. Barium-containing inoculants are especially effective for ductile iron because they:
Extend inoculation effect (fade resistance) during long pouring times
Reduce undercooled graphite and carbide formation
Promote uniform nodule count and shape, improving strength and elongation
Minimize casting defects related to poor nucleation

What's the Difference Between FeSiBa and FeSiCa?
FeSiBa: Contains barium, which improves fade resistance, reduces chill tendency, and is effective for long casting cycles.
FeSiCa: Contains calcium, which enhances desulfurization and deoxidation but has a shorter inoculation effect compared to barium-based inoculants.
In short, FeSiBa is preferred for complex castings and longer pour times, while FeSiCa is often used for quick, high-reactivity inoculation.
How Does It Enhance Graphite Morphology?
FeSiBa works by providing numerous nucleation sites in molten iron, enabling graphite to form earlier and more uniformly. The barium component stabilizes these sites, ensuring:
Finer graphite flakes in grey iron
Higher, more uniform nodule count in ductile iron
Reduced chill depth and improved machinability
Consistent microstructure throughout the casting section
Hot Tags: ferro barium inoculant low cost, China ferro barium inoculant low cost manufacturers, suppliers, factory, Cored Wire, Ferro Silicon Barium, Other Ferro Alloy, Silicon Carbide, Silicon Series, Silicon Slag To Replace Fesi And Reduce The Cost
You Might Also Like
Send Inquiry









